Product ID:W/B 46168 URETHANE PART B
MSDS Date:11/09/1993
FSC:8010
NIIN:00N056250
Kit Part:Y
MSDS Number: BWGQF

SPECTRUM COATINGS LABS INC

217 CHAPMAN ST
PROVIDENCE, RI 02905
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 401-781-4942

Cage: 0JVY7

SPECTRUM COATINGS LABS INC

PROVIDENCE, RI 02905 US

Telephone: 401-781-4942

Cage: 0JVY7

ACETIC ACID, 2-METHOXY-1-METHYLETHYL ESTER;(1-METHOXY-2

CAS: 108-65-6

RTECS: AI8295000

Fraction By Weight: 10.00%

OSHA PEL N/K

ACGIH TLV: N/K

PROPIONIC ACID, 3-ETHOXY-, ETHYL ESTER; (EKTAPRO

CAS: 763-69-9

RTECS: UF3325000

Fraction By Weight: 15.00%

OSHA PEL N/K

ACGIH TLV: N/K

HEXANE, 1,6-DIISOCYANATO-; (ISOCYANATE, HEXAMETHYLENE

CAS: 822-06-0

RTECS: MO1740000

Fraction By Weight: 0.11%

OSHA PEL N/K

ACGIH TLV: N/K

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:RESPIRATORY TRACT IRRITATION, NARCOSIS
IN HIGH CONCENTRATION, NAUSEA & VOMITING, ABSORPTION THROUGH THE
INTACT SKIN. THS PRODUCT MAY CAUSE SKIN IRRITATION UPON PLNGD/RPTD
CONTACT & MAY BE AN EYE IRRIT ANT.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYE: IF THIS PRODUCT COMES IN CONTACT WITH EYES, FLUSH W/LGE
QTYS OF WATER FOR AT LEAST 15 MINUTES. SEEK MED ATTN. SKIN: IF
PRODUCT COMES IN CONTACT W/SKIN, WASH W/MILD SOAP & LGE QTYS OF
WATER. SEEK MED ATTN IF IRRIT FROM CONTACT PERSISTS. INHAL: IF
BRTHG DFCLTYS, DIZZ/LIGHTHEADEDNESS OCCUR WHEN WORKING IN AREAS
W/HIGH VAPOR CONC, VICTIM SHOULD SEEK FRESH AIR. IF VICTIM
EXPERIENCES (SUPP DATA)

Flash Point Method:TOC
Flash Point:136F,58C
Lower Limits:1.1%
Extinguishing Media:USE FOAM, CO*2, OR DRY CHEMICAL FIRE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP.
WATER MAY BE UNSUITABLE AS EXTING MEDIA, BUT HELPFUL KEEPING
ADJACENT CNTNRS COOL.
Unusual Fire/Explosion Hazard:AVOID SPREADING BURNING LIQUID WITH WATER
USED FOR COOLING PURPOSES. KEEP WORK AREAS FREE OF HOT METAL
SURFACES AND OTHER SOURCES OF IGNITION.

Spill Release Procedures:KEEP SOURCES OF IGNIT & HOT METAL SURFS
ISOLATED FROM SPILL. FLUSH SPILLED MATL INTO SUITABLE RETAINING
AREAS OR CNTNRS W/LGE QTYS OF WATER. SMALL AMTS OF SPILLED MATL MAY
BE ABSORBED INTO AN APPROP A BSORBANT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP PROD CNTNRS COOL, DRY, & AWAY
FROM SOURCES OF IGNIT. USE & STORE PROD W/ADEQ VENT. SUFF GROUND
CNTNRS WHEN TRANSFERRING MATL FROM CNTNR TO CNTNR.
Other Precautions:PERS SHOULD AVOID INHAL OF VAPS. CONT W/THIS PRODUCT
SHOULD BE AVOIDED &/KEPT TO A MINIMUM. SHOULD CNTACT BE MADE,
REMOVE SATURATED CLTHG & FLUSH AFFECTED AREAS WITH A MILD SOAP &
WATER.

Respiratory Protection:THE USE OF RESPIRATORY PROTECTION DEPENDS ON
VAPOR CONCENTRATION ABOVE THE TIME-WEIGHTED TLV; USE A NIOSH/MSHA
APPROVED CARTRIDGE RESPIRATOR OR GAS MASK.
Ventilation:GENL MECH VENT MAY BE SUFF TO KEEP PROD VAP CONC W/IN SPEC
TIME-WEIGHTED TLV RANGES. IF GENL VENT PROVES INADEQ (SUPDAT)
Protective Gloves:IMPERMEABLE GLOVES.
Eye Protection:SAFETY GLASSES, CHEM GOGGS/FACE SHIELDS.
Other Protective Equipment:IMPERMEABLE APRONS ARE ADVISED WHEN WORKING
W/PROD. AVAILABILITY OF EYE WASH & SAFETY SHOWERS IN WORK AREAS IS
RECOMM.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRST AID PROC: CONTINUED BRTHG DFCLTYS, ADMIN O*2 UNTIL MED ASSIST CAN
BE RENDERED. IF BRTHG STOPS, BEGIN ART RESP & SEEK IMMED MED ATTN.
VENT: TO MAINTAIN SAFE VAP CONCS, SUPPLEMENTAL LOC EXHST MAY BE
REQD. OTHER SPECIAL PRECS SUCH AS RESP MASKS/ENVIRON CONTAINMENT
DEVICES MAY BE REQD IN EXTREME CASES.

Boiling Pt:B.P. Text:328F,164C
Vapor Pres:SEE INGS
Spec Gravity:1.09
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NEGLIGIBLE.
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:28

Stability Indicator/Materials to Avoid:YES
THIS PRODUCT IS INCOMPATIBLE W/STRONG ACIDS OR BASES, ALKALI METALS,
HALOGENS, & SELECTED AMINES.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:THERMAL DECOMP IN THE PRESENCE OF AIR
MAY YIELD CARBON MONOXIDE &/CARBON DIOXIDE.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, COUNTY,
STATE & FEDERAL REGULATIONS. PREVENT SPILLED LIQUID FROM ENTERING
SEWERS, STORM DRAINS, OTHER UNAUTHORIZED SEWAGE TREATMENT/DRAINAGE
SYSTEMS & NATURAL WATE RWAYS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.